Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Problem

How to upgrade the FileFlex server operating system from Ubuntu 16.04 to Ubuntu 18.04

Solution 1 - upgrade with os_upgrade script

Follow these proposed steps:

  1. Login into Server Administration page
  2. Stop all servers except Administration and Storage Server
  3. Perform Backup Now from Backup & Restore
  4. Download the newly-created backup to your local storage
  5. Depending on where your VM is hosted (VMWare Workstation, VirtualBox, HyperV, etc), go to its terminal and login with the user sadmin
  6. Type lsb_release -a. If it returns Ubuntu 18, then everything is OK and there is no need to continue.

    Distributor ID: Ubuntu
    Description:    Ubuntu 18.04.3 LTS
    Release:        18.04
    Codename:       bionic

  7. Type sudo /opt/ffs/os_upgrade.sh
  8. The process of upgrading the operating system will start.
  9. It will perform an automatic reboot. Once done, you will be asked again to login
  10. The process will start automatically, no user-interaction is required from your side, just wait to reboot once again
  11. Once ready, you will see: Ubuntu 18.04.3. LTS
  12. And that's it, now you can go back to Server Admin and start all servers in order to continue using our application.

Solution 2 - manual OS upgrade prior FileFlex script

  1. Login into FileFlex Enterprise Server Administration page
  2. Stop all servers except Administration and Storage Server
  3. Perform Backup Now from Backup & Restore
  4. Download the newly-created backup to your local storage
  5. Depending on where your VM is hosted (VMWare Workstation, VirtualBox, HyperV, etc), go to its terminal and login the user sadmin
  6. Type lsb_release -a.
    6.1. If it returns Ubuntu 18.04.3, go back to Server Administration page and press the Upgrade Machine button

    Distributor ID: Ubuntu
    Description:    Ubuntu 18.04.3 LTS
    Release:        18.04
    Codename:       bionic

    6.2. If it returns Ubuntu 16.xx.xx you should manually upgrade OS through the terminal 

  7. Run sudo mv /etc/apt/sources.list.d/ffs.list /etc/apt/sources.list.d/ffs.list.back to disable temporary fileflex repository 
  8. Run sudo apt-get update
  9. Run sudo apt dist-upgrade
    This will upgrade the OS system and all system packages to Ubuntu 16.04.7.
    During this step upgrade you might be asked to keep clamd package config
     
    Choose "keep the local version currently installed
    NOTE: If you are upgrading Ubuntu OS on Oracle VirtualBox you may see the following: 

    Choose Y or I : install the package maintainer's version  for tools.conf

  10. Reboot the system when requested once the upgrade process completes.
  11. If system reboot is not requested use the sudo reboot command
  12. After system reboot, login to server console and type sudo do-release-upgrade --mode=server -f DistUpgradeViewNonInteractive 
    This command will upgrade system to new release 18.04. 
    During this step upgrade you might be asked to 
    keep sysctl.conf file

    Type N or O
  13. Run sudo reboot to restart the system
  14.  Use the  lsb_release -a command to check the OS version. It should point to Release: 18.04.
  15. Enable fileflex repository running sudo mv /etc/apt/sources.list.d/ffs.list.back /etc/apt/sources.list.d/ffs.list
  16. Run  sudo apt-get update  
  17. Load FileFlex Server Administration page
  18. Press the Upgrade Machine button 

If you encounter any issues during the upgrade process refer to the troubleshooting list. 


Troubleshooting 

If you encounter any issues during the upgrade process refer to the current troubleshooting list. 

  1. If you see the following:

E: Could not get lock /var/lib/apt/lists/lock - open (11: Resource temporarily unavailable)
E: Unable to lock directory /var/lib/apt/lists/
sadmin@hostname:~#

This means that you have to retype again sudo /opt/ffs/os_upgrade.sh in a while. The lock of the resource will be self released.

The lock message may be seen after rebooting when the upgrade script results as well, so be sure to look for it when the upgrade resumes post-restart.


2. If for some reason the process is aborted, please do the following:

  1. If you host machine is running under Windows, install WinSCP program, if it is not already installed. If your host machine is OSX or some linux distribution, then skip this step
  2. Connect to the Virtual machine with WinSCP by creating a session with SCP protocol and supplying credentials of the sadmin user.
  3. Navigate to path "/var/log" and download the file syslog
  4. Make a capture of terminal reporting a problem as well
  5. Send email to support@fileflexcom with both the log and the capture

3. If for some reason there are packages in apt cache marked as upgradable or system needs reboot during previous system update  do-release-upgrade part of script will not work but script will continue on update steps in os_upgrade.sh 

The part of script with apt-get upgrade after do-release-upgrade will upgrade ffs packages on not upgraded OS 16. Unfortunately ffs packages are not compatible with Ubuntu 16 and python version < 3.6.9 and thus they left in broken state.  To fix such situation:

  1. Disable fileflex repository.
    sudo mv /etc/apt/sources.list.d/ffs.list /etc/apt/sources.list.d/ffs.list.back
  2. Do sudo apt-get update
  3. sudo apt-get upgrade
  4. sudo apt-get dist-upgrade
  5. sudo reboot
  6. sudo do-release-upgrade --mode=server -f DistUpgradeViewNonInteractive
  7. sudo mv /etc/apt/sources.list.d/ffs.list.back /etc/apt/sources.list.d/ffs.list
  8. reboot
  9. Update server from serveradmin GUI


  • No labels